W-101 PVC Floor Tile

W-101 PVC Floor Tile 1 Excellent durability 2 Stain Resistance 3 Eco-friendly & Safe in use 4 Comfortable foot feeling

ITEM NO. :W-101

Surface: Wood Grain

Material: PVC Floor Tile

Specifications of PVC Floor Tile:

 

Dimensions	Thickness	Wear Layer	Package	Service Life
6" * 36"	2mm	0.1mm	24 pcs/pack for 2mm thick	25 years
18" * 18"	2.5mm	0.2mm	20 pcs/pack for2.5mm thick	25 years
36" * 36"	3mm	0.3mm	16 pcs/pack for 3mm thick	30 years
600 * 600mm	4mm	0.4mm	48 pcs/pack for 6" * 36"	30 years
		0.5mm		35 years

 

Features of PVC Floor Tile:

 

1)  Good sound insulation & Excellent flexibility & Easy feeling for your foot

2)  Excellent durability and stain resistance

3)  Fire resistance & Safe for using

4)  Antibecteria & Eco-friendly

5)  Strong resistance to acid, alkali as well as iodine, high resistance to chemical

6)  Slip resistance & Safe for walking

 

 

 

PVC Floor Tile can be installed in office building, restaurant, school, supermarket, club, hotel, cinema, library etc.

 

 

Stage One: Grass-roots

1.After the installation of metope, ceiling,doors and windows were completed, clean the debris on the ground.

2.Clean the dusting, oil stain and remains of the grassroots surface.

3.Sweep the dust and sand on the ground away.

4.Roll coating the interface paint uniformly after the ground got thorough clean.

Stage Two: Self-leveling construction

1.Check whether the self-leveling cement accord with relevant technical standards, the expired self-leveling is prohibited.

2.Put certain self-leveling into the container, and dilute it by water following the instructions.

3.Stir till the self leveling cement turned into flowing state.

4.Pour the self-leveling out sequently on the ground, then make the ground smooth using a rake teeth, about 2mm thick.

5.Do not allow people walking and articles gathering on the ground within 4 hours since the self-leveling construction was completed.

Stage Three: Lining

1.Making divisions and fixing linings base on the blueprint, specifications of the pvc flooring and sizes of the rooms.

2.Creating the cross line or diagonal line, and parquet block line.

3.Creating the edge line on the wall, the lining must be distinct and accurate.

4.Arrange and pre-joint the floor following the line and numbering the floors.  

Stage Four: Installation

1.Sweep the ground with a broom or dry towel to clean the dust of the surface.

2.Coat the adhesive uniformly on the surface using a teeth-shaped scraping plate, and laying the floor from inner room to outside, forcing tightly with a roller after a room or a section was completed.

3.When the floors are ready, welding the sews refer to the temperature and drying situation.

4.Cutting a V channel on the edge of two neighbouring floors, the composition of the welding rod should be the same with the floor, and then welding by a gas welding torch on 180~250 degree.

5.Leveling the surface by a scraper after the floor cools, be cautious not to scratch the surface.

W-101 PVC Floor Tile